Pelletizing Process:

MZLH Wood Pellet Mill is the most important equipment, which have the following features:

1. The lubrication system for wood pellet mill adopts the tracing and inspecting system controlled by the microcomputer.
2. Driving Gear adopts the high precision gear transmission structure.
3. As per the ring die and roller of the wood pellet mill, we have the fine machining with the alloyed steel. And our heating treatment is also different from the other domestic manufacturer, our carburizing treatment make the depth of hard facing to 2mm, which improve the anti-abrasion of the ring die and roller more than 10 times, it can save the production cost heavily.

Bucket Elevator: To transport the dried raw material to pellet mill.

Storage warehouse: Save the material and keep the operation goes well if any stops. And the volume is 3.5M3

Auto—inspection: To inspect the oil in the bearing and avoid oil shortage.

Automatic lubrication: To add the oil automatically if the oil lack and the high temperature of roller. Lubrication is controlled by an electric switchboard, which enables to dose adequate quantity of lubricating oil to one timer and two temperature sensors responsible for programming the time of batching and the pause.

Wood Pellet press: To make wood pellet. This is the heavy duty version of the series “420” units. It can handle a power of up to 90 kw. It is an excellent model for wood pellets producers, ensuring high quality pellets. And this model adopt the gear transmission, it can save the power compared with bet transmission.