| Drum
dryer |
| |
|
| |
| Technical
parameters: |
|
Rotary dryer is the choice for high throughput capacity applications
involving high moisture, friable, free-flowing commodity products
and by-products. A rotating drum and strategically positioned
flights combine to lift and shower product evenly through
the air stream. Thermostatically controlled discharge air
temperature assures precise final moistures and great sensitivity
to varying product conditions. Single-pass or three-pass configurations
are available to match product characteristics. Heating options
include steam, gas, oil, thermal oil and auxiliary |
| |
| After
the damp raw material is put into the dryer from on end, it
is turned over through string-up rake inside the cylinder
and distributed uniform in the dryer and contacted with countercurrent
hot air fully. It speeds up heat and mass conducting of dry.
During the oeriod of dry. raw material is effected by stirring-up
rake with gradient and hot air. it can be moved and passed
through the dry region and to star valve and then discharge
the finished product. |
| |
| Technical
parameters: |
| |
| Model |
Diameter
(mm) |
Length(m) |
Power(kw) |
revolution(r/min) |
| HZG6 |
600 |
4,5,6,7,8 |
3-5.5 |
3-20
adjustment |
| HZG8 |
800 |
4,5,6,7,8,9,10 |
5.5-7.5 |
| HZG10 |
1000 |
6,7,8,9,10,11,12 |
5.5-7.5 |
| HZG12 |
1200 |
6,8,10,12,14,16 |
7.5-11 |
| HZG15 |
1500 |
8,10,12,14,16,18 |
11-15 |
| HZG18 |
1800 |
8,10,12,14,16,18,20 |
15-18.5 |
| HZG22 |
2200 |
10,12,14,16,18,20,22,25 |
18.5-22 |
| HZG24 |
2400 |
12,14,16,18,20,22,25 |
22-30 |
|
| |
Item(m) |
capacity(t/h) |
revolution(r/min) |
motor
power(kw) |
install
angle(degree) |
Temp.of
final |
| f1.0×5.0 |
0.5-1.2 |
0.6-6 |
4 |
3-5 |
=1.5% |
| f1.2×6-10 |
1.5-3 |
0.6-6 |
5.5 |
3-5 |
=1.5% |
| f1.5×12-18 |
3-5.5 |
0.6-6 |
15 |
3-5 |
=1.5% |
| f1.8×12-18 |
5-6.5 |
0.6-6 |
18.5 |
3-5 |
=1.5% |
| f2.2×12-22 |
7-12 |
0.6-6 |
22 |
3-5 |
=1.5% |
| f2.4×15-20 |
9-15 |
0.6-6 |
30 |
3-5 |
=1.5% |
| f3.0×25 |
16 |
0.6-6 |
55 |
3-5 |
=1.5% |
|
|
