| |
(1)
Pulverizing System
When the thickness of raw wood material is >10mm, and >50
* 50mm(L * W), we need use the Wood Chipper to chip them into small
pieces, then crush the small pieces into wood powder with diameter
less 3mm by Hammer Mill (Crusher) |
|
|
(2)
Drying System
The
best moisture content to pelletizing is about 13-15%. Our Rotary
Dryer is made up of Stove and Main Rotary Dryer, which can realize
to reduce the moisture from 60% to 10%. Our stove is fueled by coal,
which can save electricity consumption largely.
|
|
(3)
Pelleting System
Driven
with heavy- duty gearbox construction can produce continuously in
most adverse condition. The imported key elements are of high performance
with long life and low maintenance cost. The key parts are made
of alloy steel to be very strong and malleable. Die is made of stainless
steel. Pellet machine is widely used in the granulation of wood,
straw, other biomass sources. capacity ranges from 200kgs to 3T
per hour. |
|
(4)
Cooling /Sieving /Bagging system
After
the pelletizing process, the temperature of the wood pellet is about
60-80 degree, and the moisture content of the wood pellet is about
15%, so we need use Cooler to reduce about 3-4% moisture, such this
the wood pellet is easy to store.
After
cooling, the wood pellet will not directly enter into the fuel process,
avoiding the wood pellet affected with damp. The packing process
is necessary. In this process, we assemble our domestic best Semi-Auto
Packing Machine to you.
|
|
NOTE:
PLC System
The
Whole System adopt Siemens PLC controller, include motherboard,
input & output module, software.
MCC adopt Touch
Panel, Simulation Control Screen or Computer Control Screen is optional.
Automatic Moisture online testing, Automatic dosing, Automatic Lubricating,
Automatic Steam supply, Lower Labor cost. 24 hours continuous working.
|
| |
|
Pulverizing
System
